Wireless Inductive Charging Mod for Samsung Galaxy S

Watch Video and follow the given Hints …

Samsung Galaxy S Wireless Inductive Charging Mod

[youtube]http://www.youtube.com/watch?v=740JaJ-UX0A&feature=player_embedded[/youtube]

If you like to rebuild the mod, here are some more hints for you:

Remove all pins from plug by pulling them out forcefully before sawing.
Buy more micro USB plugs to play with, as you will certainly break some before you finish one. I suggest using the inner (black) part of one plug combined with the metal casing of a different plug.
Bent one pin as shown on the picture so it can fit into 2 pin slots, then cut it to a length that it won’t shorten any pin.
Make the solder point as long as possible, this will add more stability.
If you happen to have black hot-glue, use it as a finish to cover up the complete slot.

This entry was posted by Nasir on September 30, 2011 at 8:07 am, and is filed under Mobile Phones, Samsung. Follow any responses to this post through RSS 2.0.You can leave a response or trackback from your own site.

Type your comment
You may use these HTML tags: <a> <abbr> <acronym> <b> <blockquote> <cite> <code> <del> <em> <i> <q> <strike> <strong>
Comment Feed for this Post